tracking

E-Bike Battery
Make your e-bike battery last longer.
WHAT YOU NEED

1x

WD-40 Specialist® Contact Cleaner Smart Straw

INSTRUCTIONS
1.
Make sure your e-Bike is turned off with the switch unplugged (if it is charging) for safety measures.
2.
Use the key that came with your e-Bike to remove the battery from your e-Bike dock for easier cleaning access to the battery housing.
3.
Upon removing the battery, spray a generous amount of WD-40 Specialist® Contact Cleaner Smart Straw a few centrimetres away from the surface. Letting it penetrate the difficult to reach areas without leaving residue. It's excellent for restoring electrical conductivity and also great for treating contacts on the battery or bike, periodically or after presence of rain or mud.
4.
Let the solution sit for a couple of seconds until it is completely dry.
Tips! To check if it is dry, use the tip of your finger to lightly dab the surface to see if any remains will stick to your finger.
5.
And there you have it, a well-maintained e-bike!
Pro Tips!
To avoid any costly maintenance, be sure to treat the contacts of the battery and the e-Bike periodically, especially in the presence of mud and rain. Remove the battery whenever you are washing your e-Bike to avoid spoiling them.
WD-40® Fan Club
Love WD-40® Brand Products? Join the club!
Ooops!
Generic Popup