tracking

Paint Brusher
Make your paint brushes ageless.
WHAT YOU NEED

1x

WD-40® Smart Straw®

1x

Scrapper

1x

Soft Tissue

1x

Mild Soap

1x

Solvent
INSTRUCTIONS
1.
In case of any oil or nitro paints, soak the bristle up with the correct solvent (i.e synthetic or nitro). Leave the brushes to soak for a couple of days if it doesn't come off immediately.
1A.
For water-based acrylic or wall paint, thoroughly wash the brushes with the bristles facing upwards under running tap water.
Tip! The flow of water removes any paint trapped between the bristles.
2.
Once the solvent has dissolved most of the paint, place the brushes into a mix of soap and water.
3.
Dip the paint brushes in and scrub slowly to remove any paint residue.
4.
Rinse paint brushes under running water with the bristle facing upwards.
5.
Scrape off any solidified paint if necessary.
6.
Spray some WD-40® Smart Straw® on the bristles and ring nut.
7.
Wipe clean with a towel or soft tissue to get rid of any paint and rust residue. Before you know it, they'll be looking good as new!
Pro Tips!
While the brushes are drying, keep the bristles compact with a rubber band to keep them in a pointed shape so they don't spread out.
Clean your brushes right after usage to avoid leaving the paint to dry.
© WD-40 COMPANY (MALAYSIA) SDN BHD. All Rights Reserved
WD-40® Fan Club
Love WD-40® Brand Products? Join the club!
Ooops!
Generic Popup