Lay down your tripod onto a workbench or table of your choice with the rag spread out.
2.
Twist to unscrew all the joints until the knuckle or leg lock comes completely off.
3.
Remove the leg lock and pull the tripod leg all the way out.
4.
Shake the can of WD-40 Specialist® Dry Lube well before spraying a liberal amount of the lubricant directly onto the threads or moving parts of the tripod leg and the inside of the knuckle or leg lock. Repeat the step a few times if necessary.
5.
Once they are thoroughly cleaned and lubed, wipe off any excess solution with the rag.
6.
Assemble all the parts back together.
7.
You're done! You won't have to worry about your devices being stuck anymore.
Pro Tips!
Ensure you press hard inside the knuckle and the tripod leg threads by using your fingers if needed. This would aid in getting rid of any dirt remnants.
