“When pitch and grime build up, your saw has to work twice as hard, leading to jagged cuts and potentially damaging your motor or the wood itself.
To keep your saw clean and pristine, you’ll need a few basics: WD-40 Specialist® Rust Remover Soak, WD-40® Smart Straw, and some protection and cleaning tools. Finish the job with WD-40 Specialist® Dry Lube, it forms a slick, non-sticky coating that reduces cutting friction and sawdust or debris after cleanup.
By removing the gunk and protecting the metal, you ensure every cut is smooth and effortless, extending the life of your equipment for many more projects to come.”
Put on protective gloves to handle sharp edges safely and wear a face mask if using solvents. Lay down old newspaper to catch rust residue, making cleanup as simple as throwing the paper away.
Using a blade scraper at a low angle, use short, firm strokes to remove loose rust and grime. Work from one end of the blade to the other until the heavy surface oxidation is cleared.
For heavily rusted blades, submerge them in a container of WD-40 Specialist® Rust Remover Soak. This formula dissolves stubborn rust without the need for harsh scrubbing or scraping.
Don’t forget your face mask when dealing with paint thinners or strong chemicals. Ensuring your safety allows you to focus on getting the best restoration results.
Apply a generous coat of WD-40® Smart Straw® across the entire blade. This provides a pristine finish while creating a moisture-displacing barrier to prevent future corrosion. For the best results, finish with WD-40 Specialist® Dry Lube to form a slick, non-sticky coating that reduces cutting friction after cleanup.
For heavily oxidized blades, submerge the parts in a container with WD-40 Specialist® Rust Remover Soak. This specialized formula dissolves stubborn rust safely, restoring the metal to its original condition.