Tripod

Prevent tripod from being stuck.

Things you will need

Step 1

Preparing

Lay down your tripod onto a workbench or table of your choice with the rag spread out.

Step 2

Preparing

Twist to unscrew all the joints until the knuckle or leg lock comes completely off.

Step 3

Preparing

Remove the leg lock and pull the tripod leg all the way out.

Step 4

Spraying

Shake the can of WD-40 Specialist® Dry Lube well before spraying a liberal amount of the lubricant directly onto the threads or moving parts of the tripod leg and the inside of the knuckle or leg lock. Repeat the step a few times if necessary.

Step 5

Cleaning

Once they are thoroughly cleaned and lubed, wipe off any excess solution with the rag.

Step 6

Re-Assemble

Assemble all the parts back together.

Step 7

Finished

You’re done! You won’t have to worry about your devices being stuck anymore.

TRIPOD

Prevent tripod from being stuck.